Elemental Impurity Q3D

API Elemental Impurities (ICH Q3D) Risk Assessment & Testing Control Guide

Updated: Jun 2025QTC Global Compliance TeamRegulatory reference content

Detailing ICH Q3D principles for 24 metal elements, analyzing hazards from equipment, raw materials, catalysts, and compiling control plans.

Key answer

An elemental impurities risk assessment is mandatory for global filings. The review must address Class 1 elements (As, Cd, Hg, Pb), Class 2A (Co, Ni, V), and intentional catalysts. If ICP-MS/ICP-OES testing shows residues are consistently below 30% of the PDE (the Control Threshold), the element can be excluded from specifications, but the assessment must remain in the technical file.

Four Sources of Elemental Impurities in Manufacturing

To compile a solid risk assessment, manufacturers must evaluate every physical and chemical contact point in the process rather than relying on final testing.

  • Intentionally added elements: metals used as catalysts in chemical reactions (e.g., Pd, Pt, Ru)
  • Unintentionally added: trace minerals carried over by process water or inorganic materials
  • Equipment contact: metal leaching (Fe, Cr, Ni) from reactors, centrifuges, and stainless steel lines under acid/alkali
  • Packaging migration: metal additives leaching from plastic drums or elastomeric seals during storage

FAQ

How do you convert PDE to concentration limits (ppm)?+

Conversion depends on the maximum daily dose of the drug. Formula: Concentration limit (ppm) = PDE (ug/day) / Max daily dose (g/day). For example, if Pb PDE is 5 ug/day and max dose is 10g, the concentration limit is 0.5 ppm.

Next steps

If this topic applies to your product, facility, or supply chain requirement, start by confirming the target market, customer-required standard, existing documents, audit history, and expected timeline.