AQL Sampling Inspection Knowledge Base
Guidance on AQL sampling, ISO 2859-1, ANSI/ASQ Z1.4, inspection levels, sample size code letters, Ac/Re numbers, and Critical/Major/Minor defect classification.
Quick calculation
Use the AQL calculator to determine sample size, acceptance number, and rejection number.
Table interpretation
Turn code letters, Ac/Re, and AQL 2.5/4.0 into customer-readable guidance.
Inspection decisions
Help buyers and suppliers understand inspection reports, defect classes, and sampling plans.
AQL Knowledge Topics
Common guidance on sample size, Ac/Re, inspection levels, and defect classification.
What Is AQL Sampling Inspection and How Do Buyers Use It?
Explains AQL sampling inspection, lot size, inspection level, sample size, Ac/Re accept-reject numbers, and why AQL is not the same as quality assurance.
AQL 2.5 vs AQL 4.0: What Is the Difference?
Explains why inspections often use Major AQL 2.5 and Minor AQL 4.0, and how to adjust based on industry, risk, and buyer requirements.
How Is the AQL Sample Size Code Letter Determined?
Explains how lot size, general inspection levels I/II/III, and special inspection levels S-1 to S-4 determine the sample size code letter and sample size.
What Do Ac and Re Mean in an AQL Table?
Explains Ac acceptance number and Re rejection number in AQL inspection results, and why Re is usually Ac + 1.
How to Classify Critical, Major, and Minor Defects
Explains Critical, Major, and Minor defect classification in inspection reports and why Critical defects are usually zero-tolerance.
