EU Food Contact Materials Migration Testing: SML, OML, and Food Simulant Selection Guide
Detailed guide to EU Regulation (EU) No 10/2011 specific migration limits (SML), overall migration limits (OML), food simulant selection criteria, and Declaration of Compliance (DoC) requirements for plastic food contact materials.
The core of EU food contact material (FCM) compliance is migration testing: demonstrating that substances from the material do not migrate into food or simulants above SML limits, and total migration does not exceed OML (10 mg/dm²). Plastics are regulated by EU No 10/2011; testing requires selecting food simulants matching the actual food contact conditions, and issuing a Declaration of Compliance (DoC) based on test results.
1. Applicability & Scope
Applies to manufacturers and suppliers producing or importing plastic food contact materials (films, containers, packaging, coatings) entering the EU market. Does not directly apply to non-plastic materials (paper, metal, glass, ceramics — regulated by different frameworks or national regulations).
2. Regulatory Basis & Standards
Key regulations: EU No 10/2011 (specific measures for plastic food contact materials); (EC) No 1935/2004 (framework regulation on FCMs); (EC) No 2023/2006 (GMP regulation for FCMs). Test methods: EN 1186 series (overall migration test methods); specific migration analytical standards for individual substances. DoC requirements: Article 15 of No 10/2011 specifies the format and required information for compliance declarations.
3. Common Industry Misconceptions
Myth 1: "Chinese factories only need GB standards to export to the EU." Chinese GB 9685 and GB 4806 standards are not equivalent to the EU system; plastic FCMs exported to the EU must be tested per EU regulations and issued EU-format DoCs. Myth 2: "Migration testing only requires overall migration (OML)." EU No 10/2011 requires separate specific migration (SML) testing for each restricted substance (or compliance proof via calculation models). Myth 3: "Only the finished product needs testing, not the raw materials." DoC obligations start at the raw material supplier level; a finished product manufacturer's DoC must be based on upstream raw material supplier declarations.
4. Required Documents Checklist
EU food contact material DoC document package must include:
- Material composition and monomer/additive list (with CAS numbers and EU No 10/2011 positive list status for each component)
- Justification for food simulant selection (referencing EU No 10/2011 Annex III food simulant selection matrix)
- Overall migration test report (OML, acceptance criterion ≤10 mg/dm² or 60 mg/kg)
- Specific migration test reports or calculation model evidence for restricted substances
- Declaration of Compliance (DoC): including issue date, material description, applicable regulations, testing basis, and declaration scope
5. How QTC Can Support
QTC provides FCM regulatory pathway assessment, food simulant selection recommendations, laboratory coordination, and DoC document review. The project aligns material formulation, migration test scope, food simulants, SML/OML data, and DoC statements for stronger EU and buyer review consistency.
6. Project Timeline & Process
Process: 1. Material and intended use description → 2. Applicable regulatory framework determination → 3. Positive list substance status check → 4. Food simulant selection → 5. Test matrix design and lab coordination → 6. Test report technical review → 7. DoC drafting and issuance.
7. Official Sources & Last Modified
Sources: EUR-Lex EU No 10/2011 full text (eur-lex.europa.eu); European Commission Food Contact Materials legislation page (food.ec.europa.eu); EN 1186 test method series. Content verified as of June 2026.
8. Professional Review Team Profile
Reviewed by QTC's food contact material compliance coaching team, with experience in EU FCM regulation (EU No 10/2011, (EC) 1935/2004) implementation coaching and DoC review.
FAQ
How should food simulants be selected?+
EU No 10/2011 Annex III provides a food simulant selection matrix: Simulant A (10% ethanol) for aqueous foods; Simulant B (3% acetic acid) for acidic foods (pH≤4.5); Simulant C (20% ethanol) for alcoholic foods (<20%); Simulant D1 (50% ethanol) for higher alcohol or higher fat content foods; Simulant D2 (vegetable oil) for fatty foods; Simulant E (poly(oxy ethylene)(10) octylphenol) for dry foods. Actual selection must be based on the type of food contacted and contact conditions; when in doubt, worst-case simulants are recommended.
Next steps
If this topic applies to your product, facility, or supply chain requirement, start by confirming the target market, customer-required standard, existing documents, audit history, and expected timeline.
