Technical Guide

ISTA Drop Test Basics for Packaging Inspection

Updated: Jun 2024QTC Global Compliance TeamRegulatory reference content

Learn how inspectors perform carton drop tests based on ISTA standards during a Pre-Shipment Inspection to ensure packaging durability.

Key answer

During a Pre-Shipment Inspection, a carton drop test based on ISTA standards involves dropping a packed master carton from a specific height (determined by weight) in a 10-drop sequence: 1 corner, 3 edges, and 6 flat faces. The carton is then opened to ensure the product inside remains undamaged.

Why Do a Drop Test?

Products often face rough handling during transit. A drop test simulates these conditions to ensure the packaging adequately protects the goods.

The Standard 10-Drop Sequence

The most common standard involves 10 drops: 1 corner, 3 edges, and 6 flat faces. The carton is opened afterward to check for damage to the product or inner packaging.

FAQ

What height is used for a carton drop test?+

The drop height depends on the carton gross weight, usually ranging from 30 inches (for light cartons) to 12 inches (for heavy cartons).

Next steps

If this topic applies to your product, facility, or supply chain requirement, start by confirming the target market, customer-required standard, existing documents, audit history, and expected timeline.