Inhalation Metal Packaging

Pharmaceutical Aerosol Metal Cans & Valve Systems Compliance Guide

Updated: Jun 2025QTC Global Compliance TeamRegulatory reference content

Introducing physical and chemical controls for aerosol aluminum cans and valve systems used in pMDIs, including sealing, DDU, and extractables.

Key answer

Pressurized metered-dose inhaler (pMDI) packaging combines aluminum cans, stainless steel springs, elastomeric seals, and actuators. Physically, testing evaluates Delivered Dose Uniformity (DDU), spray pattern, and leak-free valve sealing. Chemically, because propellants (e.g., HFAs) have high solvent capability, rigorous E&L testing is required for valve elastomers and plastics to control additive migration.

Physical Performance Metrics for pMDI Valves

Mechanical performance shifts directly alter the inhalation dose delivered to patients. Valve sites must compile batch analytical reports.

  • Delivered Dose Uniformity (DDU): measuring consistency of released formulation weight per actuation
  • Leak rate: monitoring loss of propellant in high-temperature water baths or long-term storage
  • Spring constant: evaluating mechanical spring return force stability over 200+ actuations

FAQ

Why do aerosol cans require internal coatings?+

Bare aluminum can react electrochemically with formulations or propellants, leaching metal ions. Applying a thin PTFE or epoxy-phenolic internal coating isolates the metal; the coating must comply with FDA food-contact rules and have compatibility data.

Next steps

If this topic applies to your product, facility, or supply chain requirement, start by confirming the target market, customer-required standard, existing documents, audit history, and expected timeline.